How To Install Temperature Sensor in PC- Clear Steps Explained!


How To Install Temperature Sensor in PC

Do you think your computer is getting too hot? Well, it can be. The solution is simple – keep monitoring the temperature of your CPU. But how to install temperature sensor in PC, you can do that in two ways –can install the temperature sensor inside the case by yourself or use third-party Apps.

There are many reasons for a PC to get overheated. An insufficiently ventilated room, blocked or covered computer vents, dust buildups, malfunctioning cooling systems, etc., are the outside factors that increase the temperature.

On the other hand, intense gaming, complicated functions running for longer periods at a stretch can also cause overheating.

Thermal sensors in your PC can notify you when your computer gets overheated. Let’s see how to install it.

How To Install Temperature Sensor In PC

First, allow us to tell you how you can set up a computer temperature sensor inside the CPU case of your PC.

For keeping yourself on the safe side and avoid mishaps, first wear an antistatic bracelet. It’s easy to use and will protect you from a static buildup of electrical charge in your body.

Here are the Steps Below-

  • At first, shut down the computer first. Also disconnect the power source from the wall socket.
  • Put the temperature sensors PC either at the side of your computer’s case or at one of the front plastic covers of the computer casing. For simplicity’s sake, let’s see how you can do it at the front part.
  • First, remove the side cover of the computer casing. You can do it either by unscrewing or sliding – depending on the build of it.
  • Then take out one of the front covers or bezels located at the top of the computer casing. Remove the one where you are going to put the PC temperature sensor.

These plastic covers are attached with the casing either with locking plastic tabs or Phillip screws. You can unscrew it.  Or you can put a flathead screwdriver underneath, lift it a bit and give a gentle push – this will unlock the locking tabs. Make sure no computer component is attached with that specific cover.

  • A thermal sensor PC can have many sizes. The digital monitor of the device can cover the whole plastic cover, or it can be just 2-3 inches wide.

Use a sharp NT-cutter to cut the plastic to create open space and place the monitor so that the cables stay on the inside and the monitor faces outwards. The sensor should come with screws – use them to attach it with the computer casing.

  • You may need a bit of sliding or pushing to get the monitor fixed into the drive bay.
  • Next, connect the power cable of the Thermal Sensor to one of the open connectors coming out of the power supply unit. And the other end of the cables to the monitors which is secured in the front bezel. That’s it – the temperature sensor is installed.
  • Please remember that placing of the heat sink or the sensor of the device needs to be in the warmest place inside the computer casing. Usually the top portion of the casing will be the hottest – since heat always tries to go up. If the sensor seems to be dangling, use insulating taps to secure it with the casing.
  • Put the side cover of the computer casing back in its place, power the computer back on, and check the temperature of your system.

Another Way To Keep An Eye Out For the Temperature in your PC is Through Third-Party Apps

  • You can download an app called HWiNFO and install it on your PC.
  • When you have this driver installed in your computer, you can have a track on the temperature of our CPU, Ram, and take actions accordingly.

And this motherboard temperature sensor is effective enough as well. Like the Corsair Temperature Sensor, which is mainly known as Corsair Link Commander from the computer peripherals manufacturer, can let you know precise temperatures of different components of the computer.

A Few Things to Remember

Many computers will be shut off automatically when the temperature is too high. If your computer won’t do that, you should monitor the thermal sensor regularly.

Using the PC Thermal Sensor, you can take appropriate steps when it is necessary. Below is a general guideline:

  • 60° C And Below: the computer runs fine.
  • 60° C – 70° C: temperature is still okay. Plan an immediate cleaning of the dust or clearing ways for cooling fans and vents.
  • 70° C – 80° C: still manageable, but your system is pushing through an overclock. Check the cooling fans and clear dust right this moment.
  • 80° C – 90° C: it is too hot and ideal for damaging sophisticated components.
  • 90° C and Over: it is dangerous for your whole system.

However, while overclocking, intense gaming, or editing time, the CPU can show the temperature over the desired rate, which is okay. But a better cooling fan is preferable as well.

Frequently Asked Questions (FAQs)

Where should I install my PC temperature sensor?

The most appropriate place for a PC temperature sensor would be at the top of the computer casing. The reason is hot air tends to move upwards

Do computers have temperature sensors?

Yes, computers have temperature sensors. These sensors are important because components of a computer can be damaged by overheating.

How to connect a temperature sensor to my computer?

You can connect a sensor with the power supply unit as we connect an external device as a thermal sensor. Or, you can do it using a third-party app using software.

Final Thoughts

Hopefully, after reading our article, you are now aware of how to install temperature sensor in PC.

To prevent the physical damages caused by overheating, you must know about the temperature of different computer components, especially when you run the system for longer periods. And whenever you notice the temperature goes over the range, you need to take appropriate action.

They may seem to counter productive, but these simple steps will go a long way to take good care of your computer.

You Can Also Read:

Brian Doe

Meet Brian Doe, our Windows expert,who loves to spend most of his time working with the systems and experimenting on different chips. Basically, he’s a software engineer,and his writing hobby helps him share his computing tips and solutions with you to make you a Windows DIY guy.

Recent Posts