Why is the NVME drive not showing up? There are a few possible reasons why you face this problem. The problem may be with the BIOS, backdated driver, and stuff like that. Not showing an NVME drive is very irritating, and we don’t want to increase your irritation anymore.
This guide will offer you a complete package related to that issue. We will present you with some reasons and solve the problem step by step. Hey, don’t go for the technicians with a simple matter. Just stay connected here.
Why NVME Drive Not Showing up
In this quick world, you should never avoid SSDs. Yes, that is why you get an NVME drive. However, SSDs require a certain form of transfer protocol, which the NVME driver supplies. So, if your device isn’t identifying an NVME drive, there might be a couple of problems that need to be handled.
|NVME is not detected in BIOS||Enable PCIe and re-install the NVME gain.|
|NVME driver stays backdated.||Update the driver.|
|Not properly enable||Connect with another PC.|
|Not detected in disk management.||Connect NVME to different PC.|
We hope you have taken a glance at the above column where we picked the most common reasons why m 2 SSD is not showing up.
NVME Is Not Detected In BIOS
Sometimes, your NVME drive will be seen by BIOS, creating a problem. To remove this issue, you need to enable the PCIe, and to do so
Step #1: Restart Your Computer and Access to BIOS
It may take time to restart your computer; once you restart your computer, press your boot menu key like F2, f10, f111, f12, etc.
Step #2: Enable “M.2_2 PCIe Storage RAID Support” from the advanced section
Once you restart your pc and access the boot menu, you will get access to BIOS. There, just click “Advance”. After hitting advance, click “M.2_2 PCIe Storage RAID Support” down below and enable it. It’s that simple.
To build a pc, there are many components that you need to get your work done. Whether it is an NVME drive or a usual hard disk, it needs to be inserted appropriately.
If you don’t place the NVME driver properly, your SSD will work as you expect. As SSDs are much faster than traditional hard disks, any sort of error may create troubles for your whole system.
Therefore, re-installing the NVME drive will help you eliminate this problem. Why not follow the steps below;
Step #1: Turn off your PC
You have to turn off your PC’s power supply in order to start the proceeding. If you are using a laptop, just shut that down first.
Step #2: Open your computer and re-install the SSD
You will find an SSD slot inside the casing. You need to pull out the SSD from the slog and set it up again.
Doing so gives positive results in most cases. So, you should try this out.
NVME Driver Stays Backdated
You need to update your PC’s drivers regularly.
Sometimes, a backdated NVME driver causes the problem, and you can see the NVME drive on your computer. To you have to become up to date with the drivers you have.
Let’s know how you can update your m 2 SSD.
Step #1: Go to device manager
To do so, just click the search button on your computer or laptop and search “Device Manager.” Once you jump into the device manager, follow the below step.
Step #2: Right-click on NVME drive and update the driver software.
On-device manager, you will find your NVME drive. Just right-click on the section and press “Update Driver Software” to get your work cut out.
Not Properly Enabled
It is not uncommon that there is some problem with your PC, which creates an obstacle for NVME drive. To make a guarantee that your computer is running correctly, you should try to insert your m 2 SSD with another PC.
If you do not notice the same sort of problem with another PC, something on your PC undoubtedly creates trouble for you. But, if the NVME driver is also not recognized there, you should step up to the next section.
Not Detected In Disk Management
What if your BIOS detects the NVME driver, but your windows do not? Yeah, you may be facing this sort of problem, and you need to resolve it in different ways.
Step #1: Replace NVME Drive Letter
To do so, you need to jump into the disk management section. Then right-click on the “SSD” and click “Change drive letter.” Thus, it may solve your problem most of the time.
If you still face the same issue. You have to troubleshoot your device’s hardware. But how can you do this, right?
Let’s follow the steps.
Step #1: Search “Hardware and Device manager” in the search box of your PC
Step #2: Click “Next” to scan the device
You will surely solve the issue regarding the NVME SSD not showing up in disk management.
Frequently Asked Questions (FAQs)
How Do I Get NVME Drive To Show Up?
You should perform several tasks based on your situation. If the problem is in the BIOS, you must make some changes to get rid of this issue. You can also insert your NVMR driver to another PC to notice any hardware issue. Thus, you can get NVME to show up.
How Do I Know If My NVME Is Working?
Well, you can quickly notice this if you detect the NVME on your computer. You can simply check this by clicking check under error checking. Then, you will get to know whether your NVME driver is actually working or not.
How Do I Know If My NVME Drive Is Falling?
This is not actually rocket science. You can know this by noticing some changes on your PC. The main task of an SSD is not to boost your performance while you are using a PC. If you are stuck at the time of operation of your PC very often, your SSD may surely be falling. Sometimes, your device may become read-only too.
NVME drive not showing up is one of the most significant issues for SSD users. But, do not worry if you face this sort of problem anytime. What you have to do is, follow the above steps according to your circumstances.
Hence, you don’t need to take your PC to the service center if you read this blog carefully with full attention. Try to enable the SSD card properly so that you don’t need to open up your computer to fix it again and again. Sounds great?
You Can Also Read: